High Cooling Capacity Humidification And Air Purification Rooftop Package Unit
Parameter
| MODEL | EKRT360A | EKRT420A |
| NOMINAL CAPACITY | W | 96500 | 118000 |
| NOMINAL TOTAL INPUT POWER | W | 38500 | 46800 |
| NOMINAL RUNNING CURRENT | A | 74 | 90 |
| POWER SOURCE | V/Ph/Hz | 380~415/3N/50 | 380~415/3N/50 |
| REFRIGERANT TYPE / CONTROL | | R410A/TXV | R410A/TXV |
| EVAPORATOR | CONTROL | AIR DISCHARGE | DUCTED | DUCTED |
| OPERATION | SLM CONTROLLER | SLM CONTROLLER |
| AIR FLOW | CMH | 18700 | 21300 |
| EXTERNAL STATIC PRESSURE | Pa/in.wg. | 300/1.18 | 300/1.18 |
| CONDENSATE DRAIN SIZE | R 1 | R 1 |
| CONDENSER | AIR FLOW | CMH | 40000 | 40000 |
| SOUND PRESSURE LEVEL | dB(A) | 76 | 76 |
| HOT WATER COIL | COIL | ROWS | 2 | 2 |
| WATER INLET/ OUTLET | SIZE | R 1 1/2 | R 1 1/2 |
| HEATING CAPACITY | W | 199600 | 219900 |
| WATER FLOW | l/s | 4.46 | 4.92 |
| WATER PRESSURE DROP | KPa | 12 | 15 |
| NOMINAL RUNNING CURRENT | A | 74 | 90 |
| DIMENSIONS | L×H×W (mm×mm×mm) | 3865×2345×2290 | 3865×2345×2290 |
| NET WEIGHT | KG | 1600 | 1600 |
Description
Anti-corrosive, rust-proof and adaptable
EKRT roof air-conditioning unit needs to be installed on the open
roof. Therefore, higher anti-corrosive and waterproof requirements
are raised for the unit. The shell of roof air-conditioning unit is
made of electro-galvanized steel that goes through electrostatic
anti-corrosive coating and therefore can adapt to
various outdoor climatic environments.
Intelligent control and simple operation
■ EKRT roof air-conditioning unit series is equipped with
intelligent controllers, which facilitates operation management.
■ The main unit is integrated with the electrical part in terms of
design. You just need to connect the unit to the power supply,
which saves complex electrical connection engineering.
Efficient, energy-saving, safe and reliable
■ EKRT roof air-conditioning unit uses an efficient scroll
compressor, featuring high energy efficiency ratio and high
reliability.
■ EKRT air-conditioning unit is designed in an overall structure
and is totally completed in the plant, which avoids outstanding
issues such as poor copper pipe welding on site and filling of
unclean refrigerant on site and improves the system reliability and
energy-saving effect.
Flexible installation and space-saving
During design, EKRT roof air-conditioning unit takes users’
installation requirements into full consideration. Therefore, it
adopts a compact overall structure. The base evenly bears the
weight of the compressor, heat exchange coil, blower and connecting
pipes. After fixing the integrated unit on the roof, you can
complete installation of the air-conditioning unit.
■ EKRT roof air-conditioning unit is equipped with two interfaces
for connecting air pipes in the horizontal direction and in the
vertical direction. You can flexibly select one interface according
to field installation conditions.
■ EKRT air-conditioning unit is installed on the roof, which
facilitates introduction of outdoor fresh air.
■ Because the blower uses a V-belt to drive the unit, EKRT
air-conditioning unit can adjust the air volume and air pressure as
required.
■ EKRT air-conditioning unit is directly installed on the roof,
without occupying indoor space.
Applications:
large factory buildings and workshops that need to control
temperature, humidity and cleanliness in the areas where it is
inconvenient to install water systems or areas that are short of
water resources.
Competitive Advantage:
EKRT unit using R410A refrigerant meets the energy saving and
environmental protection.
Flexible installation and space-saving.
KRT adopts a compact overall structure. Unit is installed on the
roof, which facilitates introduction of outdoor fresh air.
