R407C Screw type air cooled (heat pump) partial heat recovery unit 85 - 470 tons

Specifications

Note:
■ Rated cooling work conditions: outdoor dry bulb: 35°C; outlet water temperature: 7°C; water flow 0.172m3/(h·kW).
■ Rated heating work conditions: outdoor dry/wet bulb: 7°C/6°C; outlet water temperature: 45°C; water flow 0.172m3/(h·kW).
■ Rated working conditions for partial heat recovery units: inlet/outlet hot water temperature 50°C/55°C; inlet/outlet temperature of chilled
water: 12°C/7°C; ambient dry bulb temperature 35°C.
■ *Heating parameters marked with only apply to heat pumps units. Cooling only EKAS units do not have these parameters.
■ For on-site electric wiring, see the name plate or installation menu of the unit.

Inheriting the supreme air cooling design from EK Italy and equipped with the leading-edge total heat recovery technology, environment friendly units of R407C series can provide hot water with a temperature as high as 65°C to meet the air conditioning and hot water requirements of hospitals, clubs, factories, and so on.

More Energy Saving

The heat recovery technology improves cooling efficiency, reduces power consumption, and extends the service life of a unit. The total heat recovery technology recovers all condensate heat, saves power consumed by the fan of the heat exchanger at the air side, and reduces energy consumption by more than 15%.

One Unit for Three Purposes

One unit can be used for three purposes: cooling, heating, and free hot water. The unit can provide hot water with a temperature up to 65°C to meet guest house showering, kitchen cleaning, and factory hot water consumption requirements, thus saving investment in hot water equipment.

Less CO2 and More Environment Friendly

EK air conditioners feature a leading-edge total heat recovery technology to use waste heat, greatly save energy, and effectively mitigate the heat island effect in cities due to waste heat dissipation.

Easy Installation

The unit can be easily installed outside and requires no dedicated equipment room or operator. Free hot water is available as long as you connect the hot water pipes.

EUROKLIMAT (EK) was established in 1963 in Italy. For the past half a century, it has become famous as an energy-saving air-conditioning manufacturer in Italy and globally. Continuous innovation, new product development and top manufacturing quality are the driving force behind this growth.

EUROKLIMAT (EK) pursues the ideals of protecting the environment, providing physical comfort and adopting energy-saving into the whole process of product R&D, manufacturing and service. Our products covering residential, commercial and close control air-conditioner are manufactured according to the global generally accepted standards.